Resin Crack Sealer Plus

Resin Crack Sealer Plus by Degafloor

Based on advanced fast curing resin technology, Degafloors resin Crack Sealer Plus for concrete cracks is an ultra low viscosity, low surface tension, rapid curing reactive resin used to fill and seal cracks in concrete structures that range from hairline to 3mm in width. The resin Crack Sealer Plus for concrete cracks has been designed to penetrate deep into weak substrates to consolidate, strengthen and also to protect sound concrete against water and chloride ingress, and dusting.

Concrete can crack for a variety of issues including drying shrinkage, excess water and improper curing. However, if left untreated, it creates a physical trip hazard and can cause further damage to the area over time, especially where moisture is in the nearby vicinity.

 

We also supply a 5-year Warranty pothole repair product, Degafill, which is designed for repairs within asphalt which is currently going through the HAPAS process. This can be purchased from the Degafloor shop.

 

Substrate preparation

All substrates must be clean, dry and free from contamination i.e. dust, dirt, oil, laitance, curing compounds and other contaminants.

The substrate should be capable of accepting a resin finish and this is best achieved by mechanical means (shot blasting, planning or diamond grinding).

However, when looking to use Crack Sealer Plus as a dust proofing seal or as protection against water / chloride ion ingress, it is often possible to apply directly onto unprepared concrete (subject to an installation and curing test).

 

Chemical Resistance

Excellent chemical resistance to water and chloride ion ingress, inorganic acids, organic acids, alkalines, salts, cleaning agents and foodstuffs.

 

Cure Times

Degafloor Crack Sealer Plus cures fully within just 1 hour of installation (both chemically and physically). The cure time remains unaffected at temperatures down to 5°C.

 

Available pack sizes

Available in 25kg or 180kg steel drums.

 

Mixing and application method

Decant the required quantity of Crack Sealer Plus into a clean mixing vessel, add BPO hardener and mix with a drill and paddle for 3 minutes. Apply by squeegee or roller using a light pressure to achieve an even and consistent coverage. Apply a second coat as required.

 

Health and Safety

All resins are manufactured to ISO 9001:2008, ISO14001:2004 and BS OHSAS 18001:2007 standards and comply with all current EU hygiene of foodstuffs regulations. All our resins are non-toxic and certified to confirm physiological inoffensiveness.

 

Storage

Store below 25°C and protect against direct sunlight. At temperatures below 15°C the paraffin dissolved in the binder may precipitate. The material must be stirred thoroughly before use.

 

Resin flooring installers

Degafloor have a UK-wide network of Approved Installers who are highly trained and experienced in applying the Degfloor resin Crack Sealer Plus kit for concrete cracks.

Features and benefits include:
  • Fast 1 hour cure time – rapid installation and return to service
  • Ultra low viscosity formulation – extremely easy to install
  • Improves compressive strength and surface hardness – can save a substrate that would otherwise need to be removed / extensively repaired
  • Stabilisation of cracks up to 3mm in width – reduced risk of future cracking
  • Outstanding durability in all conditions – able to withstand tough mechanical stresses
  • Creates watertight finish – impervious to liquids
With its unique formulation, the Resin Crack Sealer Plus kit can be typically applied to the following areas:
  • Badly cracked concrete structures
  • Weak and friable concrete
  • Concrete substrates with low compressive and tensile strength
  • Dust proofing of concrete
  • Protection of concrete from water / chloride ion ingress
Case Studies

Need some inspiration? Take a look at our case studies - a wide range of projects using Degafloor resin flooring, car park and pothole repair systems.