Degaset – Mortar and Screed
Degaset Mortar and Screed solution by Degafloor
Based on advanced fast curing resin technology, Degafloor Degaset Mortar and Screed solution has been developed as a low cost repair mortar and underlay screed. The unique formulation of the product allows slump free placement, and the consistency enables the product to be shaped to create ramps, falls and to complete the most complex of repairs.
Despite concrete and screed being mainly made from similar materials (cement, aggregates and water), screed is a finer solution that is most commonly used as a finishing layer on internal floors or to level the floor prior to final floor coverings carpet, tiles, natural stone, linoleum, wood flooring, resin coatings etc.
The Degaset Mortar and Screed solution can be bulked out with a range of natural quartz sizes to enable application from depths of 5 to 50mm in a single layer. It can also be pigmented to create a lightly textured surface that can be sealed to enhance the finish and maximise performance characteristics.
We also supply a 5-year Warranty pothole repair product, Degafill, which is designed for repairs within asphalt which is currently going through the HAPAS process. This can be purchased from the Degafloor shop.
All substrates must be clean, dry and free from contamination i.e. dust, dirt, oil, laitance, curing compounds and other contaminants.
The substrate should be capable of accepting a resin finish and this is best achieved by mechanical means (shot blasting, planning or diamond grinding) although this may not always be possible due to the size and shape of the area to be repaired.
If surface preparation is not practical, please complete a bond test to check whether strong adhesion can be achieved.
The substrate should be primed using Degafloor 112 primer applied at approx. 0.4 kg per square metre.
When priming ensure any edges are also primed.
Chemical resistance Excellent chemical resistance to acids, oils, alkalines, salts, cleaning agents and foodstuffs.
Degafloor Degaset Mortar and Screed solution cures fully within just 1 hour of installation (both chemically and physically). The cure time remains unaffected at temperatures down to 5°C.
Available pack sizes
Degaset Mortar and screed solution is created by mixing a 1.2 kg unit of resin with a 15 kg bag of filler, activator and additives.
- DegasetTM resin – available in 1.2 and 12 kg sizes
- DegasetTM filler – available in 15 kg bags
It is possible to add aggregates of varying sizes to bulk out Degaset Mortar and Screed solution to make it, even more, cost-effective. Please contact our Technical Services Team for further information.
Health and Safety
All resins are manufactured to ISO 9001:2008, ISO14001:2004 and BS OHSAS 18001:2007 standards and comply with all current EU hygiene of foodstuffs regulations. All our resins are non-toxic.
All fully cured Degafloor systems are totally inert and do not create a hazard to the environment in use or during end of life disposal.
Resin flooring installers
Degafloor have a UK-wide network of Approved Installers who are highly trained and experienced in Degfloors Degaset Mortar and Screed Solution.
- Ultra fast cure time of 1 hour – rapid installation, minimal disruption
- Low cost, high performance – a viable alternative to traditional 72-hour cure screeds
- Slump free placement – ideal for creating falls and ramps
- Unique easy to use consistency – ideal for shaping and the most complex of repairs
- Simple bag and bottle system – easy to use, no separate additives/activator required
- Drain, man hole and inspection cover installation
- Cost effective fast cure underlay screed
- Levelling of uneven cementitious surfaces
- Complex repairs requiring shaping
- Creating ramps and falls
- Repairing deep holes