The unique characteristics of Degafloor resins mean that all stages of installation (priming, coating and sealing) can be undertaken with minimal, if any, waiting time between applications and that just 2 hours after installation is complete, Degafloor systems are fully cured and ready for immediate use.
This feature alone separates Degafloor resins from other resin products such as polyurethane, polyaspartic and epoxy which suffer from significantly longer curing periods, both between installation stages and the time to ultimate cure. Many of our competitors will claim a cure time of as low as twelve hours, but this will be to physical cure allowing light foot traffic. Full chemical cure allowing these systems to be returned to full operational use can take anywhere between 4 - 10 days and this timescale is significantly impacted by temperature (i.e. this range is based on an optimum installation temperature of 15-20oC, but cure times will increase as temperatures decrease).
The curing process for Degafloor systems is unaffected by temperature and hence the 2 hour cure can be achieved in temperatures as low as -30°C, thus avoiding the cost and inconvenience of extended cure times and / or having to heat spaces to raise temperatures.